Hello ๐
I just replied in another similar question :)
go here:
Do you want to connect? Login/Register and start expanding your network and knowledge!
Hello ๐
I just replied in another similar question :)
go here:
Hello, If you changed the firmware from the factory I am afraid you will have to stay with that one for the moment. Maybe in a near future we provide factory firmware but now I would suggest getting a tokymaker... (More)
Hey Alexander, thanks for your words!
did you check this thread in the community?
Also, there is a full course available in google classroom, and a full robotics course if you subscribe to the newsletter in tokylabs.com/learn65
Do you... (More)
Hello Nicolas,
Thank you for your interest!
ย please share your email with me in the chat function of this community ( up-right corner of the screen) and we will contact you for shipping options to vietnam.
Best regards!
Hello @ludovic chauveau49 , congratulations on the built!
Have you tried easy codes from www.tokylabs.com/learn78 ย and the google Classroom full course?
ย
best regards
Hello Damien!
You can find a good code example here86
More codes are yet to come, as it is a new robot made by and for the community.
There is a very nice course in google classroom. Do you have... (More)
Hello Brendan, thanks for the patience! we had a technical problem and were unable to answer you back!
Please check this tutorials here46
If you want to post any specific question, add as much information as you can, following the... (More)
Hi Ludovic, thanks for your feedback.
In addition to the free computer science course you can find here: https://classroom.google.com/u/0/w/MTk1MTk5NjAxNzg1/t/all139
and the extra curriculum in fields like robotics, smart farming and iot that you can find in this link:
We... (More)
Hi Bill, we could think on building a board like that one in the future. For now we need to use the motor shield.
cheers!
Hi buddy,
please follow this guidelines to ask a question an receive effective feedback:
Hello M Gro, there is an Ottoky group in this community, perhaps you can find routines there. Also, the Google Classroom free course is in development and some codes are on the way!
There are no libraries per se, but... (More)
Actually you can upload your project right here in this comunity. Post a project and upload the code, explain it and share some pictures. That's it!
Hello Michael,
A bit more information on your project is necessary to give precise advice. Please check these guidelines to follow a useful format: https://community.tokylabs.com/post/guidelines-to-ask-in-the-community-hi-all-please-follow-this-pdf-to-receive--5fecb068f6e73cdad8ac983658
--
If I have to give you advice with the information you posted I... (More)
Hey!ย
It is actually very simple, but you have to verify what is the right polarity of your relay.
Check this photo:
Hi!
I recommend DFRobot Gravity: SHT30ย
https://www.dfrobot.com/product-1920.html383
but the cheapest is this one:
Aquรญ tienes un video de formaciรณn para la pixycam y tokymaker.
https://www.tokylabs.com/Downloads/Pixycam_training_1.mp458
Te recomiendo comprar la pixy2
ย
Para conectar la cรกmara al Tokymaker, sigue estas indicaciones:
ย
ย
ย
ย
ย
ย
ย
Hi Bill,
There is a speaker module that can be directly connected to the tokymaker. Tokymaker can reproduce tones. but not mp3 files. However, thanks to IoT, It can reproduce songs or sounds from your spotify or Soundcloud account through... (More)